Raidho Acoustics X2t Loudspeakers

Raidho Acoustics

Raidho Acoustics X2t Loudspeakers

£12,500.00
Short Description
Raidho X2t Compact Floor Standing Loudspeaker
Variations
Product Finish
- Optional
- Optional

The quest for making a much-improved X2t began, using the same improvements from the X1t and more additional ingredients from the ultra high-end sector.

The X2t does everything the compact X1t does, just on a higher level. Additionally, the X2t has dual woofers with which you get much more bass power and a larger scale to the music.

The drivers of the Raidho X2t speaker

The two 5,25” bass driver units in the new X2t, now has the Tantalum coating. Tantalum belongs to a class of metals known as refractory metals, which are defined by their strong resistance to heat and wear. It has a melting point of 2,996 °C, the fourth highest of all metals. This makes the membrane much stiffer and harder without adding any weight and thereby raising the breakup modes to an incredible 15kHz.

The new crossover in the X2t has quality components that exceeds many other loudspeakers up to EUR 80.000. On the back you can see the point-to-point hardwiring that is all done by hand. Furthermore, the use of Nordost cable in the crossover is highly unusual and reveals the enormous attention to detail. Needless to say, the internal cable is also from Nordost with Norse technology, which is also used in the Nordost Valhalla models. Truly remarkable.

Further upgrades from the X2 to the X2t are:

  • Better components in the crossover
  • Nordost internal cabling
  • Completely retuning of the loudspeaker

A Raidho special among floor standing loudspeakers is also the use of 2,5-way construction. This guarantees a very coherent sound from top to bottom as both drive unit puts out bass, but only the upper does midrange. Decoupling of the speakers is integrated into the feet. So, there is no need for spikes to achieve the best result, because this is done with metal balls, on which the speakers rest on.

The new X2t may not look all that different to the original X2. But in reality, the only thing that stays the same is the visual appearance. The sonic performance on the other hand, is on a whole other planet.

‍Drive Unit

This drive unit is not only highly advanced and built in-house in Denmark, but is also a piece of art.

The result is that the speakers disappear even more from the equation, drawing a soundscape without audible distortion and with a pitch-black background that made the instruments stand out and create holographic sound stage.

The Legendary Raidho Ribbon Tweeter

Raidho's proprietary, trademark ribbon tweeter is a unique design. It is completely designed and build by hand in-house in Denmark. To be exact, it is a Planar Magnetic Tweeter due to the tracks in the foil. The foil is 11 micron thick, which means it is 50 times less mass in comparison to a conventional dome tweeter. This is because there is no voice coil and the extreme low weight of the foil (20 milligram). The result is virtually no resonances or distortion, and the breakup point is at an incredible 82 KHz! What you hear is amazing clear and natural sound. All the detail in the world, but no fatigue, no distortion, and no colouration.

Raidho X2t ribbon tweeter
Specifications
  • Topology: 2,5 way
  • Bass Loading: Internal vented design. Port in the rear
  • Drivers
    • 1 x Raidho Ribbon Tweeter
    • 2 x 5,25” Raidho Ceramix driver with Tantalum coating
  • Crossover Point: 130Hz and 3.4 kHz 2nd Order
  • Frequency Range: 40 Hz - 50 kHz +/-3 dB
  • Sensitivity: 87dB 2,83 V/m
  • Nominal Impedance: 4 ohm
  • Power Requirement: 50-150 Watts
  • Finish: Piano Black, White 
  • Dimensions: WxHxD, mm: 300 x 1065 x 490 mm, including feet
  • Enclosure WxD, mm: 143 x 410
  • Weight, kg: 23

Overall Rating