For many applications, the speed of digital communication is important. Most visibly, “speed” is about transferring large files as quickly as possible, or carrying enough data for an HD video. For USB audio (and for HDMI audio), “speed” is critical not because of how-much how-fast, but because time relationships within a digital stream are critical to the reconstruction of the analog waveform that brings information, music and joy to our ears. Time-based damage (jitter) to this information within the data package makes the sound small and flat instead of 3D, harsh and foggy instead of smooth and clear.

AudioQuest USB Type-C cables featuring conductor materials and construction techniques that have allowed AQ’s other USB cables to achieve “Best-In-Class” recognition worldwide.

With the newer USB Type-C connector quickly becoming commonplace on many devices, AQ’s line of Type-C equipped USB cables will allow users to connect with Type-C enabled devices such as MacBook, ChromeBook, Pixel, Galaxy Note 7, etc.

In addition, ALL of AudioQuest’s USB cables incorporate a newly developed strain-relief system to provide robust durability between the USB cable and plug.

SuperSpeed USB 3.0 specifies data-transfer rates up to 4.8Gbps vs. Hi-Speed USB 2.0’s maximum signaling rate of 480Mbps.

solid 1.25% silver conductors for improved digital performance

Solid conductors eliminate strand-interaction distortion and reduce jitter. Solid silver-plated conductors are excellent for very high-frequency applications, like HDMI audio. These signals, being such a high frequency, travel almost exclusively on the surface of the conductor. As the surface is made of high-purity silver, the performance is very close to that of a solid silver cable, but priced much closer to solid copper cable. This is an incredibly cost effective way of manufacturing very high-quality HDMI cables.

semi-solid concentric 1.25% silver conductors

Semi-Solid Concentric conductors greatly reduce strand-interaction distortion and reduce jitter. Silver-plated conductors are excellent for very high-frequency applications, like USB audio. These signals, being such a high frequency, travel almost exclusively on the surface of the conductor. As the surface is made of high-purity silver, the performance is very close to that of a solid silver cable, but priced much closer to solid copper cable. This is an incredibly cost effective way of manufacturing very high-quality USB cables.

hard-cell foam insulation

Hard-Cell Foam (HCF) Insulation ensures critical signal-pair geometry. Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Hard-Cell Foam Insulation is similar to the Foamed-PE used in our more affordable Bridges & Falls cables, and is nitrogen-injected to create air pockets. Because nitrogen (like air) does not absorb energy and therefore does not release any energy from or into the conductor, distortion is reduced. In addition, the stiffness of the material allows the cable's conductors to maintain a stable relationship along the cable's full length, producing a stable impedance character and further minimising distortion.