Project Xtension 10 Turntable (no cartridge)

Project

Project Xtension 10 Turntable (no cartridge)

£3,249.00
Product Condition
New
Short Description
High-end turntable with 10“ tonearm

Superlative vinyl performance in a more compact size
Variations
Product Finish
- Optional
- Optional
- Optional
- Optional
- Optional
- Optional
- Optional
- Optional
- Optional
- Optional

The Xtension 10 chassis is made from MDF filled with metal sand, that gives high mass and is non-resonant. Magnetic feet, which decouple the main plinth from its base, are combined with a weighty 22 kg total turntable mass. With these two magnets located in the feet, the turntable is practically floating.The result is a unique combination of ‘mass loaded’ and ‘floating turntable’ design principles. Instead of the old standard adoption of pure metal used for the main platter, we’ve found a perfect alloy which we damped on the inner side with Sorbothane®. Additionally we’ve glued recycled Vinyl records to the top (which act as a perfect mat) and bake this ‘sandwich’ before precision balancing it. The final product subsequently benefits from a wonderfully resonance-free, heavy platter, that runs ultrasilently on an inverted ceramic ball bearing with magnetic suspension. The Pro-Ject 10” Evolution with its tonearm base also benefits from ‘high-mass’ technologies, and is isolated from the main board by a sheet of Sorbothane®. To use this tonearm with a wide range of top quality phono cartridges, from 4 to 14 Grams it comes with a set of 4 different Sorbothane®- damped counterweights.

A high-rise flat with a low table with a turntable on it.  There's a man standing looking out of a large arched window

Pro-Ject Audio Systems offers their high-end turntables with premium 5pin > RCA unbalanced arm cable or – by request – with premium balanced 5pin > XLR connection to Pro-Ject Phono Box RS preamplifier. Phono Box RS offers balanced phono inputs, what guarantees superior results in high-end vinyl reproduction with a balanced signal source.

NOTE: The signal source and the receiving device have to be equipped with balanced connections. Transmission of audio signals in a balanced mode reduce the influence of interference due to external stray electric fields significantly.

in the box:

  • Xtension 10 Evolution optionally as SuperPack with Ortofon Cadenza Black
  • Connect it 5P-C RCA Cable (Upgrade option: 5P-XLR)
  • Dust cover
  • Adapter for 7“ singles
  • Record puck
  • Counterweights for 4-14g cartridges
  • Power supply, allen key, spirit level, gloves

features

  • Super-heavy 22 kg belt drive turntable
  • Mass loaded magnetic floating subchassis
  • Precision balanced sandwich-platter
  • Inverted ceramic ball bearing with magnetic support
  • Heavy weight record clamp
  • Extremely low level of natural resonance
  • Perfect decoupling through magnetic feet
  • Electronic speed control 33/45/78 Upm
  • Tonearm 10cc Evolution made from carbon fibre
  • Inverted tonearm bearings (ABEC 7 quality)
  • Dust cover included
Specifications
Speeds:
 
33 / 45 / 78 RPM (Electronic)
Micro-Adjustments Possible
Turntable Feet: Sorbothane-Damped Aluminium
Magnetically Supported
T/T Main Bearing Damping: Heavy-Weight Metal Block
Rumble: -71dB
Speed Variance: ±0.09%
Wow & Flutter: ±0.01%
Signal to Noise: -73dB
Platter: 300mm Sandwich-Type (5.7kg)
Record Puck Weight: 0.8kg
Tonearm: 10CC Evolution
Effective Arm Length: 254mm
Overhang: 16mm
Effective Tonearm Mass: 8.5g
Tracking Force Range: 10 - 30mN
Cartridge Weight Range: 4 - 14g
(4 Different Counterweights)
Tonearm Cable Included: Pro-Ject Connect-IT 5P C 1.23m
External Power Supply: 15V / 1.6A DC
Power Consumption:  4W (Max.)/ <1W Standby
Included Accessories: Dust Cover, Record Puck
Dimensions: 480 x 235 x 400
480 x 495 x 535 (Lid Open)
Weight: 22kg (net)

Overall Rating