QNAP HS-453DX-4G

QNAP HS-453DX-4G

£669.98
QNAP HS-453DX silent NAS available with solid state drives SSD and conventional drives (HDD)
*
*
*

QNAP HS-453DX silent NAS

Specifications

HS-453DX-8G

 

CPU Intel® Celeron® J4105 quad-core 1.5 GHz processor (burst up to 2.5 GHz)
CPU Architecture 64-bit x86
Graphic Processors Intel® HD Graphics 600
Floating Point Unit Yes
Encryption Engine  (AES-NI)
Hardware-accelerated Transcoding Yes
System Memory 4GB  (2 x 2GB) or 8 GB SO-DIMM DDR4 (2 x 4 GB)
Maximum Memory 8 GB (2 x 4 GB)
Memory Slot 2 x SO-DIMM DDR4

For dual-DIMM configuration, you must use a pair of identical RAM modules.

Flash Memory 4GB (Dual boot OS protection)
Drive Bay 2 x 3.5-inch SATA 6Gb/s, 3Gb/s

The system is shipped without HDD.
For the HDD compatibility list, please visit https://www.qnap.com/compatibility/

Drive Compatibility 3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
Hot-swappable Yes
M.2 SSD Slot 2 x M.2 2280 SATA 6Gb/s slots
SSD Cache Acceleration Support Yes
Gigabit Ethernet Port (RJ45) 1
10 Gigabit Ethernet Port 1 x 10GBASE-T (10G/5G/2.5G/1G/100M)
Jumbo Frame Yes
USB 2.0 port 2
USB 3.0 port 3 (1 x USB-C, 2 x USB-A)
IR Sensor  (RM-IR004)
HDMI Output 2, HDMI 2.0 (up to resolution 3840 x 2160 @ 60Hz) + HDMI 1.4b (up to 3840 x 2160 @ 30Hz)
Audio Input 2 x 3.5mm dynamic microphone input jacks
Audio Output 1 x built-in speaker, 1 x 3.5mm line out jack (for amplifiers or speakers)
Form Factor Set-top design
LED Indicators Power/Status, HDD1-2
Buttons Power, Reset
Dimensions (HxWxD) 43.8 × 404 × 220 mm
Weight (Net) 2.4 kg
Weight (Gross) 3.87 kg
Operating temperature 0 - 35 °C (32°F - 95°F)
Relative Humidity 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
Power Supply Unit External Power Adapter, 90W, 100-240V
Power Consumption: HDD Sleep Mode 13.55 W
Power Consumption: Operating Mode, Typical 22.38 W
Sound Level 6.2 db(A)
System Warning Buzzer

 

Overall Rating